К 800 24 V

K units are a series of operating devices, with KS control boards builded inside, created for automatic movement of sliding doors and gates weighing up to 2200Kg/4846lbs. They are available in various versions, for easy and functional use anywhere from detached homes or apartment blocks to large company premises.
They are equipped with gradual start, electronic adjustment of the force, electronic brake (as standard features) and with OPTICAL ENCODER in the PLUS version

The ENCODER, which is included in the PLUS version, indicates when the gate comes into contact with an obstacle, and reverses the movement (as required by new European regulations EN12453, EN12445) without the need to fit edge sensors.

In the version K800 24V, the low voltage motor combined with the encoder also allows slow-down of the gate when shutting, giving the movement a still greater sense of safety and fluidity.

In the event of a power cut your gate will not remain locked because using the customised key provided, you will be able to open it with ease.

K800 24V version with the buffer batterie mean that black-outs will pass totally unnoticed. In fact it is possible to do up to 150 cycles during the black out period on a 3mt long sliding gate.

K-CRX 2007

• automatic travel and timing code learning system
• adjustable low speed in approaching
• gradual start
• electronic brake
• pedestrian command
• automatic closure
• pedestrian automatic command
• ready to warm the motor
• pre-blinking
• electronic adjustment of the force
• radio command – step by step (open – stop – close) or automatic (open-close)
• single command – step by step (open – stop – close) or automatic (open-close)
• built-in radio receiver 433MHz
• safety strip self-test as required by EN12453
• built-in motor heater
• Connectable to photocells – strips – blinker – key selector

S1

• automatic travel and operating time learning system
• automatic closure
• pre-blinking
• gradual operation start
• adjustable low speed in approaching
• electronic brake
• electronic adjustment of the force
• radio command – step by step (open – stop – close)
• single command – step by step (open – stop – close)
• directional open – close commands (with timer control)
• stop command
• piloting of the optical encoder on PLUS version
• pedestrian opening
• automatic closing from the pedestrian
• safety strip self-test as required by EN12453
• built-in motor heater
• Connectable to photocells – strips – blinker – key selector