Automatic barrier President
Automatic barrier with a built in magnetic encoder system to detect any obstacles and command the movement reversal, as required by the EN 60335-2-103 norm related to automatic barriers. The PRESIDENT barrier reverse its movement even when it detects an obstacles during the last 5 cm of its run.
The cabinet is made of cast aluminium and steel, covered with a coat of epoxide paint.
Speed slow down in opening and closing .
PRESIDENT is also comprised of a base plate, a 3m (AA50075) or 4 m (AA50077). telescopic boom arm and the stickers for the boom arm.
A simplified installation, without the need to adjust the tension of the springs and the position of the limit switches.
Key release provided.
An inbuilt PARK 24V control board which has been arranged with the possibility to activate further features.
A back up battery (code ACG9511) and a battery charge board (code ACG4661) can be installed (180 cycles).
Manufacturer: RIB
Web site: www.ribind.com
PARK 24V
- automatic travel and timing code learning system
- automatic closure
- pre-blinking
- Continuous operation during power failure (with optional batteries and batteries recharge card)
- soft start – soft stop
- radio command – step by step or automatic
- single command – step by step or automatic
- directional open and close commands (with timer control)
- stop command
- PARK feature to control a parking (with EXPANDER 24V card optional)
- BLACK-OUT feature with automatic closure when the power supply return
- Connectable to encoder to detect obstacle – photocells – strips – blinker – key selector
EXPANDER (optional card)
- traffic lights
- courtesy light
- pedestrian opening
- permits to manage a parking system
- 24Vdc accessories feeding
Information request
