STOPPER-T 275
Automatic bollards
STOPPER T 275 A (AUTOMATIC)
STOPPER T 275 A is an automatic traffic controller that resist against crashes and bad weather conditions.
Ideal for intensive use up to 2.000 daily operations.
It is suggested for:
- COMPANY ENTRANCES FOR VEHICLES
- INDUSTRIAL SITES’ ENTRANCES FOR VEHICLES
- COMMERCIAL SITES’ ENTRANCES FOR VEHICLES
- PEDESTRIAN AREAS
- RESERVED LANES FOR PUBBLIC VEHICLES
- COMPANIES AND FORWARDING AGENTS DEPOTS
It can be set with multiple optional features according to the different installation requests, such as:
- command items (remote controls, tags, key selectors, timers etc…)
- security items (inductive loop detectors, detection infrared/ultrasound sensors, etc…)
- Configuration items (blinking signals that can be integrated in the upper part of STOPPER T, devices for automatic lowering of the bollard in case of power failures, traffic lights and heating systems, etc..)
In case of black outs STOPPER T can be manually lowered thanks to the release system available in the bollard.
Manufacturer: RIB
Web site: www.ribind.it
STOPPER T 275 SA (SEMI-AUTOMATIC)
Ideal for a very low number of operations or in pair with the automatic version. The design is identical to the automatic version.
The working principle is the following: when turning the release key with the STOPPER T in the lowered position, the bollard will raise itself automatically thanks to a gas actuator inside the operator. With the STOPPER T in the upper position, turn the release key and lower the bollard as far as the floor level. This operation can be helped by lightly pressing down the bollard with your foot. It does not require power supply.
STOPPER T 275 F (FIXED)
The design is identical to the above versions, and can be used as an assistance for the automatic and semi automatic versions, when the area of vehicle passage must be reduced, or for aestitic reasons, in combinations with the Automatic STOPPER T 275.
Information request
